Images are representations only.

Radolid® Protection Caps

Brand: Advance Products & Systems, LLC
Request Information
Radolid® Protection Caps are used to eliminate corrosion of nuts and bolts and allow quick removal when necessary. These caps are easily installed by pressing the cap onto the bolted joint by hand. Radolid® Caps barbed edges snap in place, preventing the caps from accidentally being removed.

Radolid® Caps are manufactured with low density UV-resistant polyethylene and are reusable and can be reapplied 2-3 times.

To ensure against corrosion from condensation accumulating in the caps, we recommend brushing nuts with Kleergel® Corrosion Inhibitor Grease. Radolid® Protection Caps will keep nuts and bolts corrosion free for years.

Standard Radolid® Protective Caps are black, but they are also available in clear, white, red, grey, silver and other colors on request.

Radolid® caps are sized to fit heavy hex nuts only; they will not fit finished nuts properly. Radolid® Protection Caps are manufactured in sizes to fit 1/4 inch to 3 3/4 inch diameter bolts or studs.
Features
  • Standard Radolid® Protection Caps are manufactured of low density black UV-resistant polyethylene that withstands temperatures of -84 °F to +210 °F
  • They are also resistant to water, brine, hydraulic fluid, diesel, greases, gasoline, hydrochloric acid concentrate, sulfuric acid to 40%, nitric acid to 40%, ammonia, and acetum
  • High temperature material of Polyamid A4H for use up to +430 °F is available
Radolid® Protection Caps are used to eliminate corrosion of nuts and bolts and allow quick removal when necessary. These caps are easily installed by pressing the cap onto the bolted joint by hand. Radolid® Caps barbed edges snap in place, preventing the caps from accidentally being removed.

Radolid® Caps are manufactured with low density UV-resistant polyethylene and are reusable and can be reapplied 2-3 times.

To ensure against corrosion from condensation accumulating in the caps, we recommend brushing nuts with Kleergel® Corrosion Inhibitor Grease. Radolid® Protection Caps will keep nuts and bolts corrosion free for years.

Standard Radolid® Protective Caps are black, but they are also available in clear, white, red, grey, silver and other colors on request.

Radolid® caps are sized to fit heavy hex nuts only; they will not fit finished nuts properly. Radolid® Protection Caps are manufactured in sizes to fit 1/4 inch to 3 3/4 inch diameter bolts or studs.
Features
  • Standard Radolid® Protection Caps are manufactured of low density black UV-resistant polyethylene that withstands temperatures of -84 °F to +210 °F
  • They are also resistant to water, brine, hydraulic fluid, diesel, greases, gasoline, hydrochloric acid concentrate, sulfuric acid to 40%, nitric acid to 40%, ammonia, and acetum
  • High temperature material of Polyamid A4H for use up to +430 °F is available
Close