Images are representations only.

Twin Pak Pipeline Heaters

Brand: Bruest Catalytic Heaters
When requestion information, please download the Fillable PDF to provide details about your Twin-Pak use case. Instructions for completing the form are in the footer of the document. Once completed, please upload the document with the Request for Information.
Pilot Regulator Heater

Bruest’s Twin-Pak pipeline heaters are designed for quick and easy installation with a wide range of BTU inputs in different sizes to accommodate various pipeline sizes and heating requirements. 

Twin-Pak pipeline heaters can be used at gate stations, gas filtration plants, and other locations where heat is required directly on the pipe or vessel. 

The compact design of the Twin-Paks allows for heating where space is limited without reconfiguring existing pipes. The Twin-Paks include one or two Bruest catalytic heaters. 

The Bruest catalytic heaters are designed for use in general wiring, Class I, Division 2, Group D (FM Marked), or Class I, Division 1, Group D (CSA Marked) locations. 

As with all Bruest catalytic heaters, the heaters are started with electric power.

The input power can be 12VDC, 120VAC, or 240VAC. Fuel gas supply can be either Natural Gas or LP gas for additional flexibility.

Bruest Catalytic Heaters are designed for safety, efficiency, and ease of use in mind.

The heaters are offered in multiple sizes, BTU ratings, and configurations to meet varying application requirements.

All Bruest Catalytic Heaters are available for installation in Class I, Division 1 or 2, Group D locations.

Applications Considerations

Bruest Twin-Pak pipeline heaters are simple to install with virtually zero modification required to existing pipes.

Guidelines Include:
  • Length of unobstructed pipe: need sufficient length for Twin-Pak
  • Diameter of pipe relative to Twin-Pak height: Height of Twin-Pak is preferred to be 4X pipe diameter or less
  • Gas flow dynamic: Speed and turbulent flow can help heat transfer
  • Color of pipe: Darker color are better suited
  • Distance of pipe to ground: Twin-Paks should be mounted off the ground to avoid contamination by water or other debris

Specifications

The Twin-Paks can be used to heat the gas upstream of pressure regulators and measurement facilities prior to a pressure cut.

The dual heater Twin-Pak is equipped with fuel gas manifold with pressure regulators and dual temperature controllers.

Each heater can be operated independently of the other, allowing the Twin-Pak to have a 4:1 turndown ratio.

They are designed primarily for outdoor use and can be placed in isolated, unmanned areas with minimal user maintenance required.

Twin-Paks are economical alternative solutions that can be quickly implemented.
Features
  • Compact, portable design - Easily relocated to where heat is required
  • Multiple BTU rating and starting voltages - Sized to meet application demand, pipe size, and power availability
  • Stainless Steel construction - Can be installed outdoors without affecting performance
  • Mounted directly on pipe
    • Quick and easy installation
    • Operation ready in as little as 3 hours 
  • Hazardous location rated - Minimal installation space
  • Mechanically operated
    • Electricity required only during startup 
    • Minimal maintenance 
  • Short lead time - Available in as little as two weeks
Pilot Regulator Heater

Bruest’s Twin-Pak pipeline heaters are designed for quick and easy installation with a wide range of BTU inputs in different sizes to accommodate various pipeline sizes and heating requirements. 

Twin-Pak pipeline heaters can be used at gate stations, gas filtration plants, and other locations where heat is required directly on the pipe or vessel. 

The compact design of the Twin-Paks allows for heating where space is limited without reconfiguring existing pipes. The Twin-Paks include one or two Bruest catalytic heaters. 

The Bruest catalytic heaters are designed for use in general wiring, Class I, Division 2, Group D (FM Marked), or Class I, Division 1, Group D (CSA Marked) locations. 

As with all Bruest catalytic heaters, the heaters are started with electric power.

The input power can be 12VDC, 120VAC, or 240VAC. Fuel gas supply can be either Natural Gas or LP gas for additional flexibility.

Bruest Catalytic Heaters are designed for safety, efficiency, and ease of use in mind.

The heaters are offered in multiple sizes, BTU ratings, and configurations to meet varying application requirements.

All Bruest Catalytic Heaters are available for installation in Class I, Division 1 or 2, Group D locations.

Applications Considerations

Bruest Twin-Pak pipeline heaters are simple to install with virtually zero modification required to existing pipes.

Guidelines Include:
  • Length of unobstructed pipe: need sufficient length for Twin-Pak
  • Diameter of pipe relative to Twin-Pak height: Height of Twin-Pak is preferred to be 4X pipe diameter or less
  • Gas flow dynamic: Speed and turbulent flow can help heat transfer
  • Color of pipe: Darker color are better suited
  • Distance of pipe to ground: Twin-Paks should be mounted off the ground to avoid contamination by water or other debris

Specifications

The Twin-Paks can be used to heat the gas upstream of pressure regulators and measurement facilities prior to a pressure cut.

The dual heater Twin-Pak is equipped with fuel gas manifold with pressure regulators and dual temperature controllers.

Each heater can be operated independently of the other, allowing the Twin-Pak to have a 4:1 turndown ratio.

They are designed primarily for outdoor use and can be placed in isolated, unmanned areas with minimal user maintenance required.

Twin-Paks are economical alternative solutions that can be quickly implemented.
Features
  • Compact, portable design - Easily relocated to where heat is required
  • Multiple BTU rating and starting voltages - Sized to meet application demand, pipe size, and power availability
  • Stainless Steel construction - Can be installed outdoors without affecting performance
  • Mounted directly on pipe
    • Quick and easy installation
    • Operation ready in as little as 3 hours 
  • Hazardous location rated - Minimal installation space
  • Mechanically operated
    • Electricity required only during startup 
    • Minimal maintenance 
  • Short lead time - Available in as little as two weeks

Specifications

Heat Value

  • 6000 - 144,000 BTU

Estimated Weight

  • 25 - 220 lbs