Images are representations only.
Bruest® HOTCAT Natural Gas Line Heaters
When requesting information, please download the Fillable PDF to provide details about your HOTCAT use case. Instructions for completing the form are in the footer of the document. Once completed, please upload the document with the Request for Information.
Description
HotCat Line Heaters - Technology Overview
Bruest HOTCAT natural gas line heaters uses Bruest’s catalytic heater panels as the heat source.
The catalytic heater panels convert the fuel gas to CO2, water vapor, and infrared heat with virtually no NOx in the process.
The process begins by preheating of the catalyst with electric power. Electric power is required for 20 to 30 minutes per zone during the startup process.
Once the catalyst has been preheated, the fuel gas can be introduced to complete the startup process.
The HOTCATs are offered with either manual or automated control system to suit different application requirements.
Manual Systems
Manual HOTCATs are controlled with the included thermostatic control valve. The heater panels are manually started individually or in groups.
Power is applied for 20 to 30 minutes before gas is introduced manually through the safety valve.
The number of panels used would depend on the expected operating conditions.
Addition or removal of heat panels would need to be done by the operator to match changing conditions.
A high temperature shutoff option is available to prevent overheating of the gas during low to zero flow periods.
Automation Control Systems
The HOTCAT line heater automation control systems use Allen Bradley’s Micro850 (available for smaller HOTCATs) or CompactLogix (all sizes) PLC controllers.
The control system adds or removes heat by comparing the temperature of the output RTD to the setpoint.
For tighter control of the gas temperature, a second temperature sensor can be added downstream.
All automated HOTCATs require a constant power source to start the heater panels and the supervisory control.
Ethernet communication is standard for integration of the HOTCAT to the local control system as needed.
Applications
The HOTCAT natural gas line heaters continues Bruest’s tradition of offering safe, effective, and clean heating solutions for the natural gas industry.
Multiple standard configurations, as well as customizable features, allow the HOTCATs to be matched to the application demands.
Features- Outdoor installation of HOTCATs will provide years of worry free operation with greater aesthetic appeal
- HOTCAT heater panels can be configured to be installed in Class 1 Division 2 locations, greatly reducing space requirements
- Without a standing pilot, the HOTCATs do not consume energy when idle and has no risk of a pilot blowout
- Operation of the HOTCATs requires lower initial and ongoing maintenance costs with low to zero emission of NOx and reduced environmental impact
- HOTCATs can be safely located in populated areas as they have a lower profile and are silent when running
- HOTCATs offers built-in “redundancy” as each zone can operate independently of the others
Specifications
Specifications
Heater Size
- R8, R12, 6X24, 12X24, 12X36, 12X48
Material of Construction
- Stainless Steel Exterior on Galvanized Steel Frame
- Carbon Steel Heat Exchanger
Heat Source
- Catalytic Heater Panels without an Open Flame
Number of Heaters
- 2 - 40
Pilots
- None required
Environmental Impact
- Direct Heating without need of Glycol
- Virtually Zero NOx
Number of Zones
- 1 - 16
Installation Location
- No Noise with Lower Overall Height
Heaters / Zone
- 1 - 5
Multi-Zone Operation
- Yes
Voltage
- 12 VDC, 120 VAC, 240 VAC, 480 VAC
Heat Input
- 28,800 - 3,456,000 BTUH
Applications
Applications
- Town Border, Gate, Regulation Stations
- Compressor Stations
- Fuel Gas Systems
- CNG Let Down Systems
- Custom Heating Solutions
- Line Heater
